Customizing Pages, Single Analog | Lowrance electronic LMF-400

Section 5: Advanced Operation

Customizing Pages

In this section, we're going to take a look at how each of the pages can be customized.

NOTE:

In order to access a page-specific menu make sure the desired page is on the display when you press the menu button. The page menus have a lot of similarities, but many have specific menu categories that only will appear on the basic menu if accessed while that page is on the main screen. For example, if you wanted to access the Fuel Manager menu, then you must scroll through the pages until the Fuel Manager page is displayed on the screen before pressing MENU.

Basic menu with Customize highlighted.

Single Analog

A single gauge display, the Single Analog page may be customized to monitor any of the following: Alt Voltage, Battery Voltage, Engine Temp, Atmospheric Pressure, Temperature, Fluid Level, PaddleWheel Speed, Pitot Speed, GPS Speed and Tachometer.

To customize the Single Analog page:

1.Scroll through the pages set for display by pushing the ENTER or EXIT key.

2.Once the Single Analog page is displayed, press MENU, select CUSTOMIZE and press ENTER.

3.Scroll through the device list and highlight the category you want to monitor, then press ENTER. The information you selected will be displayed on the screen.