Lowrance or LEI device con- nects to new T connector.
Existing network node
Add
Attach terminator at end of bus.
Add a new device to a NMEA 2000 bus by attaching a T connector between two T connectors, between a T connector and the end terminator, or between two backbone extension cables.
If you want to add a node at the end of the line (as shown in the previous figure), remove the terminator from the very last connector, securely attach the new T connector, and then attach the terminator on the new connector. Either method will allow you to add a device.
Additional Network Information
Further instructions on creating or expanding a LowranceNET network are illustrated in the NMEA 2000 network setup booklet, part number
8