Reference Manual R FR 5010 Version1.4
Installation Instructions
The rack frame chassis R FR 5010 / R FR 5011 is intended for operation in broadcast environments.
The operation in excessive dust and moisture or extreme temperature requires special provisions like
•dust filters
•air conditioning
•avoidance of condensed water.
Caution!
The power cords must meet the safety requirements of the country where the rack frame is used and has to be approved in this country, e.g.
•
•
•CSA certified in Canada
CAUTION!
The power supply cords are used to disconnect the R FR 5010 / R FR 5011 from the mains supplies, make sure that the
CAUTION!
The rack frame chassis is a CLASS I EQUIPMENT, ensure before initial operation that protective earth is connected to the building wiring and zero potential is established.
The functional earth connection at the rear termination panel is connected internally to protective earth. If necessary, it may be used for potential equalization to other units.
Page 32