Lynx R FR 5011, R FR 5010 manual Alarm Function, Over temperature Redundant Power Supply Failure

Page 18

Reference Manual R FR 5010 Version1.4

Alarm Function

This function requires the controller option. The user can assign triggers for the preferred Major / Minor and No Alarm conditions using the controller and supplied software.

The alarm connector provides GPO contacts for 2 alarm levels and a GPI input for future use. This allows for the connection of an external monitoring system. Alarm conditions are triggered by the optional control system and will vary depending on the configuration of the system and user preferences.

For critical failures in the rack a contact can be closed between Alarm Minor and Alarm Common. Some examples of “critical” type failures are listed below*:

Over temperature

Redundant Power Supply Failure

For major failures in the rack a contact can be closed between Alarm Major and Alarm Common. Some examples of “major” failures in the rack are:

Loss of Power

Page 18

Image 18
Contents Reference Manual Ver Reference Manual R FR 5010 Version1.4 Double Pole / Neutrale Fusing Warnung This Page is intentionally left blank Warranty Europe Declaration of ConformityFCC 47 Part Contents Reference Manual R FR 5010 Version1.4 Getting Started PackagingProduct Description Reference Manual R FR 5010 Version1.4 Rack Layout Exploded rack viewReference Manual R FR 5010 Version1.4 Power Supply Power Supply seen From Front Power Connection Rear Termination PanelRack Connections Alarm Connection Alarm ConnectorAlarm Function Over temperature Redundant Power Supply FailureConnector wiring detail when used for the Bus Extension Extend ConnectionControl Connection LAN Connection External Sync ConnectionAlarm/LED Status Indicators LEDs and indicator locations and functionPower Supply LED Indicators Fan Alarm LED R FR 5011 onlyRack Layout Considerations Rack ConfigurationAssembly Rear Connection PlatesRedundant Power Supply Remote ControllerSelection shown is just an example Rackwith Hot Swapping Power SuppliesPower Supply Failure CardModulesRack Installation LocationVentilation Mechanical Installation Front Panel Removal R FRSub D 9 Connector on Front Cover of R FR Electrical Installation Installation Instructions Installations-Anweisung Settings and Control Specifications R FR 5010 / R FR Available Options Model DescriptionParts List ServiceContact Information Website MailReference Manual R FR 5010 Version1.4