Lynx R FR 5010, R FR 5011, Series 5000 Rack Frame manual Power Supply

Page 14

Reference Manual R FR 5010 Version1.4

Power Supply

The R FR 5010 / R FR 5011 includes the primary power supply. A second identical power supply can be added for redundancy. The Power supply is a sophisticated design designed for critical applications and includes power filtering and integral microprocessor. This monitors the supply operation and reports into the control system. Should a fault develop, the errors are alarmed in the following ways:

Via the LED located on the front of the supply (Figure 4).

Via a GPO alarm via the alarm connector on the termination panel (figure 5), if a controller option is fitted

Via the control system (if installed)

If the redundant power supply is installed, the system will switch supplies automatically in the event of primary supply failure, with no interruption to the normal operation of the rack.

The supply has a noiseless integral DC fan for cooling.

The supply is installed and removed from the front of the rack. Removing the rack front cover plate provides access. The supply is secured firmly in place with a screw located at the bottom front of the unit (figure 4).

Page 14

Image 14
Contents Reference Manual Ver Reference Manual R FR 5010 Version1.4 Double Pole / Neutrale Fusing Warnung This Page is intentionally left blank Warranty FCC 47 Part EuropeDeclaration of Conformity Contents Reference Manual R FR 5010 Version1.4 Product Description Getting StartedPackaging Reference Manual R FR 5010 Version1.4 Rack Layout Exploded rack viewReference Manual R FR 5010 Version1.4 Power Supply Power Supply seen From Front Rack Connections Power ConnectionRear Termination Panel Alarm Connection Alarm ConnectorAlarm Function Over temperature Redundant Power Supply FailureConnector wiring detail when used for the Bus Extension Extend ConnectionControl Connection LAN Connection External Sync ConnectionAlarm/LED Status Indicators LEDs and indicator locations and functionPower Supply LED Indicators Fan Alarm LED R FR 5011 onlyRack Layout Considerations Rack ConfigurationAssembly Rear Connection PlatesRedundant Power Supply Remote ControllerSelection shown is just an example Rackwith Hot Swapping Power SuppliesPower Supply Failure CardModulesVentilation Rack InstallationLocation Mechanical Installation Front Panel Removal R FRSub D 9 Connector on Front Cover of R FR Electrical Installation Installation Instructions Installations-Anweisung Settings and Control Specifications R FR 5010 / R FR Available Options Model DescriptionParts List ServiceContact Information Website MailReference Manual R FR 5010 Version1.4