M A G M A
cable to the host card and the other end of the cable to the expansion interface card already installed in the chassis. Note: You may wish to verify the EIF is securely mounted in the chassis in the upstream slot.
Connect x8 end to | Connect x8 end to |
the chassis along with the power cord. | the host card. |
CAUTION
All cables attached to the expansion chassis must be securely fastened. When you hear a “click,” it is properly secured. If not securely connected, the connectors may cause intermittent or lost connections.
NOTE
If at all possible, plug all power cords from the expansion chassis and your host computer into a shared power strip, preferably one that has surge and noise suppression circuitry built into it.
Laptop Installation (optional)
In addition to interfacing the
6