NovaJet PRO 600e
Priming the ink delivery lines
After filling the ink reservoirs, you will need to prime each of the four ink delivery lines to establish ink flow through the lines and ink cartridges. The NovaPrime is provided for this purpose. Be sure it has batteries in it before continuing.
Sight Tube
This procedure needs to be done the first time you set up the printer and whenever ink cartridges are replaced. It is not necessary when refilling the reservoirs.
When filling more than one color of ink, be sure to thoroughly wipe any excess ink from the NovaPrime before working with the next color to avoid the possibility of contamina- tion.
➪To install tube needle assemblies and prime the delivery lines
1Snap the tube needle assembly connector into the fitting on the carrier. Insert the needle into the small hole on the NovaPrime. There are two connectors for each cartridge - one is blue and the other is gray. Be sure that the tube needle assembly is plugged into the same color connector as the ink reservoir.
2Press the button on the NovaPrime to activate the vacuum and draw ink from the reservoir into the needle.
ENGLISH
Quick Start 15