Nova Kool PRO 600E quick start

Page 16

NovaJet PRO 600e

3When ink is visible in the NovaPrime sight tube (should take 5-10 seconds), remove the cartridge needle from the NovaPrime and quickly insert it into the hole in the top of the ink cartridge. Be sure the needle is tightly connected by turning the fitting clockwise until finger-tight.

4Gently tighten the fitting (about 1/4 turn) to prevent air leaks. Do not over- tighten. Wait 20 seconds for the ink pressure to stabilize.

5Remove the cartridge from the carriage and remove the blue tape from the jet area of the cartridge. CAUTION! Do not tilt the cartridge up higher than a 30 degree angle. This could cause the cartridge to lose pressure.

6Rotate the cartridge one complete revolution counterclockwise to ensure that there are no twists in the ink delivery line.

Check for ink on the jet plate. Continuous bleeding of the jet plate indicates a loss of vacuum in the cartridge or an air leak in the lines. A small amount of ink can be cleaned off the jet plate by dabbing with a moist, lint-free cloth.

7Insert the cartridge into the carriage.

16 Quick Start

Page 15 Page 17
Image 16
Page 15 Page 17
Contents NovaJet PRO 600e Quick Start Guide 210058-03 Rev. AAContents NovaJet PRO 600e Quick Start Unpacking your printerAssembling the stand and printer English Page NovaJet PRO 600e System Requirements Installing the ICC Color Profiles Using the control panel Setting the languageChoosing menu functions To change the languageLoading media To load roll mediaTo install the cutter Installing the cutterMoving the carriage Filling the ink reservoirs Installing the ink cartridgesTo fill the ink reservoirs To install the ink cartridges Priming the ink delivery lines Page English Printing the color test Printing the prime patternTo print the color test To print the prime patternTo interpret the Prime test pattern Clogged jetsAligning the ink cartridges To perform color deadband compensationTo perform color calibration Paper axis calibration To print the Paper Axis calibration test patternTo clear cartridge recognition error Cartridge recognitionQuality Imaging Supplies
Top Page Image Contents