Nova Kool PRO 600E quick start English

Page 5

NovaJet PRO 600e

6Remove the wing nut and mount the dryer assembly in the slots provided at the base of the stand. Be sure fans will blow upward and toward the printer. Position the dryer assembly to the desired angle. Replace and tighten the wing nut on the left side.

7 Plug the dryer connector into the receptacle on the right stand leg.

Quick Start 5

ENGLISH

Image 5

Contents 210058-03 Rev. AA NovaJet PRO 600e Quick Start GuideContents Unpacking your printer NovaJet PRO 600e Quick StartAssembling the stand and printer English Page NovaJet PRO 600e System Requirements Installing the ICC Color Profiles Setting the language Using the control panelChoosing menu functions To change the languageTo load roll media Loading mediaMoving the carriage Installing the cutterTo install the cutter To fill the ink reservoirs Installing the ink cartridgesFilling the ink reservoirs To install the ink cartridges Priming the ink delivery lines Page English Printing the prime pattern Printing the color testTo print the color test To print the prime patternClogged jets To interpret the Prime test patternTo perform color deadband compensation Aligning the ink cartridgesTo perform color calibration To print the Paper Axis calibration test pattern Paper axis calibrationCartridge recognition To clear cartridge recognition errorQuality Imaging Supplies