NovaJet PRO 600e
8Repeat with each cartridge.
9Press Utility/Access Cartridges to return the carriage to the service station.
10Print the color test, prime test pattern and paper axis test as described in the following sections.
11If all colors look fine, go on to step 15. If any color drops out, prime car- tridges as necessary, using the NovaPrime. Place the suction end of the NovaPrime over the jet area of the cartridge.
12Make sure the NovaPrime is making good contact with the jet area. Pulse the pump 3 - 5 times, until the ink is visible in the NovaPrime sight tube. Maintain good contact between the inkjet plate and the pump for an addi- tional 5 seconds.
When removing the NovaPrime, use the silicone tip to wipe and clean the jet plate. Remember to clean the silicone tip of ink before moving to the next cartridge.
13
14
15Once all cartridges are working correctly, print the color deadband and color calibration test patterns as described in the section on Aligning the ink cartridges which follows.
ENGLISH
Quick Start 17