Installing the ICC Color Profiles

NovaJet PRO 600e

1Insert the CD-ROM in your disk drive and navigate to drivers\MAC\(language)\epu and double-click the Install Print Utility icon.

2Click Continue. Driver installation information displays. You may want to print it at this time.

3Click Continue and the program will prompt you with further instructions.

4Select the port to which your printer is connected. If you are using a print server, select AppleTalk for the port, then select the print server in the Chooser using one of the LaserWriter drivers.

If you are not using AppleTalk, you will need a standard ImageWriter II serial cable attached to either the printer or modem port. Attach the other end of the cable to the RS-422 port on the printer. Refer to the instructions on the CD-ROM for further details.

!Caution: Wider prints (60" vs 42" vs 24") and 600DPI prints require substantial file sizes. You may experience printer slowing or stalling when using the Windows driver to print from an application, or when printing a file using the ENCAD Macintosh EPU. The number of print passes specified will significantly impact the data transfer requirements. Less passes require more data; conse- quently, there is a higher probability of stalling when using less passes (faster printing modes). To do independent RIPing and printing, or faster simultaneous RIPing and printing, you may want to consider a stand-alone software or hardware RIP product. A list of RIP products that supports the NovaJet PRO 600e can be found at www.encad.com.

Note: ICC color profiles are installed automatically for the Macintosh EPU.

ENCAD Windows drivers use ICC color management profiles to provide the best possible color match between your original source file and your final printed output. These files, while not required, are essential to providing the maximum efficiency and quality from your ENCAD Windows drivers. These color profiles are located in the Color folder on the CD-ROM shipped with your printer. It is highly recommended that you install these files prior to printing with your new printer.

1Insert the CD-ROM into your disk drive.

2Open the \Color folder.

3Double click 600eicc.exe.

4The color management files are installed in C:\Windows\system\color and have a file extension of .icm.

ENGLISH

Quick Start 9