Nova Kool PRO 600E quick start Cartridge recognition, To clear cartridge recognition error

NovaJet PRO 600e

Cartridge recognition

The printer is designed to use only ENCAD PRO 600e cartridges. To eliminate potential damage to the printer, a Cartridge Recognition feature checks to ensure that ENCAD PRO 600e cartridges are installed, and that they are installed properly. Cartridge recognition is performed when a print request is received (i.e., image data, prime, etc.).

In addition to cartridge recognition, the printer automatically performs tests on the cartridges and uses the information to improve image quality, monitor cartridge life, and update the user with system status. Some tests are performed between prints and require no user input, while others require user input.

Cartridge-related error messages are listed in Appendix F of the User Guide.

To clear a cartridge-related error, press Access Cartridges to move the carriage to the position which allows replacement of the ink cartridges. Check to make sure you have ENCAD NovaJet PRO 600e cartridges installed in each position, that they all contain the same type of ink (i.e. GA, GS, or GO) and all cartridges are installed properly. Install new cartridges if necessary.

➪To clear cartridge recognition error:

1Press Access Cartridges to move the carriage to the position which allows replacement of the ink cartridges.

2Verify that four ENCAD PRO 600e cartridges are installed. Replace any invalid cartridges.

3Press OK. If the problem has been corrected, the printer will proceed with the print request. If the problem has not been corrected, the printer will beep.

ENGLISH