La Crosse Technology WS-7136U instruction manual Setting the Time

Page 14

5.Press and release the “RESET/+” button to select your desired temperature format.

6.Press and release the “SET” button to advance to the time setting or wait 15 seconds for the display to return to the normal mode.

V. SETTING THE TIME

1.Press and hold the “SET” button for 5 seconds.

2.“12:h” will begin to flash.

3.Press and release the “SET” button twice.

4.The hour will begin to flash.

5.Press and release the “RESET/+” button to advance the hour to your desired hour.

6.Press and release the “SET” button to

14

Image 14
Contents WS-7136U Wireless 433 MHz Temperature Station Table of Contents Inventory of Contents IndoorAdditional Equipment not included Quick Setup Do not Press ANY Buttons for 15 MinutesPage Page Page Press and release the SET button once more and you are done Battery Indoor Temperature Station II. Programming Sequence III. Setting the Time Format IV. Setting the Temperature FormatSetting the Time Page Features Minimum and Maximum Temperatures Adding Additional Remote Temperature Sensors Optional Resetting the Minimum and Maximum TemperaturesPage Page Viewing and Operating with Multiple Remote Sensor Units Mounting Remote Temperature Sensor Temperature Station Troubleshooting SolutionPage Page Maintenance and Care Instructions Specifications Measuring Range TemperatureIndoor AAA Temperature Station Page Page FCC Disclaimer FCC ID OMO-01RX Receiver OMO-01TX Sensor