La Crosse Technology WS-7136U instruction manual

Page 15

move to the minute setting.

7.The minutes will begin to flash.

8.Press and release the “RESET/+” button to set the minutes.

9.Press and release the “SET” button to advance to the time setting or wait 15 seconds for the display to return to the normal mode.

Note: There is “PM” displayed to the left of the hour when between noon and midnight. During the AM hours this area will be blank.

15

Image 15

Contents WS-7136U Wireless 433 MHz Temperature Station Table of Contents Indoor Inventory of ContentsAdditional Equipment not included Do not Press ANY Buttons for 15 Minutes Quick SetupPage Page Page Press and release the SET button once more and you are done Battery Indoor Temperature Station II. Programming Sequence IV. Setting the Temperature Format III. Setting the Time FormatSetting the Time Page Features Minimum and Maximum Temperatures Resetting the Minimum and Maximum Temperatures Adding Additional Remote Temperature Sensors OptionalPage Page Viewing and Operating with Multiple Remote Sensor Units Mounting Remote Temperature Sensor Temperature Station Solution TroubleshootingPage Page Maintenance and Care Instructions Measuring Range Temperature SpecificationsIndoor AAA Temperature Station Page Page FCC Disclaimer FCC ID OMO-01RX Receiver OMO-01TX Sensor