La Crosse Technology WS-7136U instruction manual Mounting Remote Temperature Sensor

Page 21

MOUNTING

Note: To achieve a true temperature reading, avoid mounting in direct sunlight. We recommend that you mount the remote temperature sensor on an outside North- facing wall. The sending range is 80ft; obstacles such as walls, concrete, and large metal objects will reduce the range. Place both units in their desired location temporarily to test reception capability before permanently mounting.

A. REMOTE TEMPERATURE SENSOR

1.Remove the mounting bracket from the remote temperature sensor.

2.Mount using either screws or adhesive tape.

3.Reattach the remote temperature sensor to the mounting bracket.

21

Image 21
Contents WS-7136U Wireless 433 MHz Temperature Station Table of Contents Indoor Inventory of ContentsAdditional Equipment not included Do not Press ANY Buttons for 15 Minutes Quick SetupPage Page Page Press and release the SET button once more and you are done Battery Indoor Temperature Station II. Programming Sequence IV. Setting the Temperature Format III. Setting the Time FormatSetting the Time Page Features Minimum and Maximum Temperatures Resetting the Minimum and Maximum Temperatures Adding Additional Remote Temperature Sensors OptionalPage Page Viewing and Operating with Multiple Remote Sensor Units Mounting Remote Temperature Sensor Temperature Station Solution TroubleshootingPage Page Maintenance and Care Instructions Measuring Range Temperature SpecificationsIndoor AAA Temperature Station Page Page FCC Disclaimer FCC ID OMO-01RX Receiver OMO-01TX Sensor