La Crosse Technology WS-7136U instruction manual

Page 8

To complete the set up of your indoor temperature station after the 15 minutes have passed, please follow the steps below.

1.Press and hold the “SET” button for 5 seconds.

Note: A “12h” or “24h” will appear on the top line. (“12h” for AM/PM, “24h” for military time)

a.To change between “12h” and “24h” press and release the “RESET/+” button.

b.When you have your choice shown on the display press and release the “SET” button once.

2.Degree Fahrenheit will now show.

a.To change between Fahrenheit and Celsius, press and release the “RESET/+” button.

b.When you have your choice shown on the display press

8

Image 8
Contents WS-7136U Wireless 433 MHz Temperature Station Table of Contents Inventory of Contents IndoorAdditional Equipment not included Quick Setup Do not Press ANY Buttons for 15 MinutesPage Page Page Press and release the SET button once more and you are done Battery Indoor Temperature Station II. Programming Sequence III. Setting the Time Format IV. Setting the Temperature FormatSetting the Time Page Features Minimum and Maximum Temperatures Adding Additional Remote Temperature Sensors Optional Resetting the Minimum and Maximum TemperaturesPage Page Viewing and Operating with Multiple Remote Sensor Units Mounting Remote Temperature Sensor Temperature Station Troubleshooting SolutionPage Page Maintenance and Care Instructions Specifications Measuring Range TemperatureIndoor AAA Temperature Station Page Page FCC Disclaimer FCC ID OMO-01RX Receiver OMO-01TX Sensor