La Crosse Technology WS-7136U instruction manual Temperature Station

Page 22

B. THE TEMPERATURE STATION

1.The indoor temperature station comes with the table stand already mounted. If you wish to use the table-stand, all that is required is to place the indoor weather station in your desired location.

2.To wall mount:

a)Remove the table stand by pulling down on the stand from the rear and rotating forward.

b)Fix a screw (not included) into the desired wall.

c)Place the indoor weather station onto the screw using the hanging hole on the backside.

d)Gently pull the indoor weather station down to lock the indoor weather station into place.

22

Image 22
Contents WS-7136U Wireless 433 MHz Temperature Station Table of Contents Inventory of Contents IndoorAdditional Equipment not included Quick Setup Do not Press ANY Buttons for 15 MinutesPage Page Page Press and release the SET button once more and you are done Battery Indoor Temperature Station II. Programming Sequence III. Setting the Time Format IV. Setting the Temperature FormatSetting the Time Page Features Minimum and Maximum Temperatures Adding Additional Remote Temperature Sensors Optional Resetting the Minimum and Maximum TemperaturesPage Page Viewing and Operating with Multiple Remote Sensor Units Mounting Remote Temperature Sensor Temperature Station Troubleshooting SolutionPage Page Maintenance and Care Instructions Specifications Measuring Range TemperatureIndoor AAA Temperature Station Page Page FCC Disclaimer FCC ID OMO-01RX Receiver OMO-01TX Sensor