Chapter 1 Introduction
zOPERATING TEMPERATURE :
0 to 60°C (32°F to 140°F)
zINPUT POWER REQUIREMENT :
AT power: +5V, +12V
Only +5V: +5V only provide power for SBC, It does not have enough power to support expansion card.
zBOARD DIMENSION :
102mm x 145mm (4.02” x 5.71”)
zBOARD NET WEIGHT :
290 grams (0.64 lb)
1-3. SAFETY PRECAUTIONS
Follow the messages below to avoid your systems from damage:
1.Avoid your system from static electricity on all occasions.
2.Prevent electric shock. Don‘t touch any components of this card when the card is
3.Disconnect power when you change any hardware devices. For instance, when you connect a jumper or install any cards, a surge of power may damage the electronic components or the whole system.
Page: |