Chapter 4 Award BIOS Setup
LBA (Logical Block Addressing): During drive accesses, the IDE controller transforms the data address described by sector, head and cylinder number into a physical block address, significantly improving data transfer rates. For drives greater than 1024 cylinders.
DRIVE A AND DRIVE B:
Select the type of floppy disk drive installed in your system. The available options are 360KB 5.25in, 1.2KB 5.25in, 720KB 3.5in, 1.44MB 3.5in, 2.88MB 3.5in and None.
VIDEO:
This category selects the type of video adapter used for the primary system monitor. Although secondary monitors are supported, you do not have to select the type in Setup. Available Options are as follows:
EGA/VGA | Enhanced Graphics Adapter/Video Graphics Array. |
| For EGA, VGA, SEGA, SVGA or PGA monitor |
| adapters. |
CGA 40 | Color Graphics Adapter, power up in 40 column mode. |
CGA 80 | Color Graphics Adapter, power up in 80 column mode. |
MONO | Monochrome adapter, includes high resolution |
| monochrome adapters. |
HALT ON:
This category allows user to choose whether the computer will stop if an error is detected during power up. Available options are “All errors”, “No errors”, “All, But keyboard”, “All, But Diskette”, and “All But Disk/Key”.
BASE MEMORY:
Displays the amount of conventional memory detected during boot up.
EXTENDED MEMORY:
Displays the amount of extended memory detected during boot up.
TOTAL MEMORY:
Displays the total memory available in the system.
Page: |