Pro-Tech ULV Celeron M 3.5" Embedded Card With VGA/ SOUND/ LAN Clear Cmos Data Selection

Chapter 2 Hardware Configuration

2-17. CLEAR CMOS DATA SELECTION

JP3 : Clear CMOS Data Selection

The selections are as follows :

FUNCTION	JUMPER SETTING
	(pin closed)

Normal Open

Clear CMOS Close

JUMPER

ILLUSTRATION

*** Manufacturing Default is set as Normal.

Note: To clear CMOS data, user must power-off the computer and set the jumper to “Clear CMOS” as illustrated above. After five to six seconds, set the jumper back to “Normal” and power-on the computer.

EB-471LF USER′S MANUAL Page: 2-13