HP Enterprise File Services WAN Accelerator Setting Host Parameters, Setting Primary Interface

Setting the

Primary

Interface

52

Setting Host Parameters

This section describes how to set host parameters for the HP EFS WAN Accelerator. It includes the following sections:

‹“Setting the Primary Interface,” next

‹“Setting In-Path Interfaces” on page 54

‹“Setting Auxiliary Interfaces” on page 58

‹“Setting Main Static Routes” on page 59

‹“Setting Static In-Path Routes” on page 60

‹“Setting the DNS” on page 61

‹“Modifying the Host Name” on page 63

‹“Mapping Hosts to IP Addresses” on page 63

‹“Setting Proxies” on page 64

You modify settings for the primary interface in the Host Settings - Interface Primary page.

You were prompted to configure the primary interface when you completed the installation wizard. This section describes how you can modify these settings.

IMPORTANT: The primary and in-path interfaces can share the same subnet. The primary and auxiliary interfaces cannot share the same network subnet.

CONFIGURING THE HP EFS WAN ACCELERATOR