HP Enterprise File Services WAN Accelerator Setting Remote Logging, To set up remote logging

Setting Remote Logging

To set up remote logging

4.Click Apply to apply your settings to the running configuration. (Apply your settings to test a new configuration before saving them permanently.)

5.Click Save to save your settings permanently or click Reset to return the settings to their previous values.

You set remote logging in the Logging - Remote Log Servers page.

Remote logging forwards HP EFS WAN Accelerator logs to a remote server you specify.

Enabling this feature is optional.

1.Click the Setup tab to display the Setup menu.

2.Click Logging to expand the Logging menu.

3.Click Remote Log Servers to display the Logging - Remote Log Servers page.

Figure 2-53.Logging - Remote Log Servers Page

4.Use the controls to complete the configuration, as described in the following table.

Control	Description
Add Remote Syslog Server	Server IP. Specify the IP address for the system log server (syslog).
	Minimum Severity. Select a severity level from the drop-down list.
	Add Server. Click Add Server to add the remote server to the Remote Syslog Server
	list.
	Remove Selected Servers. To remove an entry, click the check box next to the entry and
	click Remove Selected Servers.

	5. Click Save to save your settings permanently or click Reset to return the settings
	to their previous values.
124	CONFIGURING THE HP EFS WAN ACCELERATOR