HP Enterprise File Services WAN Accelerator manual Click Remove Selected Receivers, 121

	4. Use the controls to complete the configuration, as described in the following table.
Control		Description
Add New Trap Receiver		Receiver IP. Specify the IP address for the SNMP trap. For detailed information about
		SNMP traps sent to configured servers, see “SNMP Traps” on page 210.
		Community. Specify the SNMP community name.
		Type. Select v1 or v2c from the drop-down list to specify the SNMP software version.
		Enabled. Select True to enable or False to disable the trap receiver.
		Add Trap Receiver. Click Add Trap Receiver to add the configuration to the Trap
		Receiver list.
		Remove Selected Receivers. To remove an entry, click the check box next to the entry
		and click Remove Selected Receivers.

2 CONFIGURING THE HP EFS WAN ACCELERATOR

Setting Monitored Ports

5.Click Save to save your settings permanently or click Reset to return the settings to their previous values.

You set TCP ports you want to monitor in the Reports - Monitored Ports page.

By default, traffic is monitored on ports 21 (FTP), 80 (HTTP), 139 (CIFS:NetBIOS), 445 (CIFS:TCP), 1433 (SQL:TDS), Radius (1812), TACACS+ (49), and 7830 (MAPI).

HP STORAGEWORKS EFS WAN ACCELERATOR MANAGEMENT CONSOLE USER GUIDE 121