HP Enterprise File Services WAN Accelerator manual Setting the Date and Time, To set the date, 125

Setting the Date and Time

This section describes how to set the date and time, and Network Time Protocol (NTP) servers for the HP EFS WAN Accelerator. It includes the following sections:

‹ “Setting the Date and Time,” next ‹ “Setting NTP Servers” on page 126

Setting the Date You set the date, time, and time zone in the Date & Time - Set Clock page.

and Time

To set the date and	1.	Click the Setup tab to display the Setup menu.
time	2.	Click Date & Time to display the Date & Time - Set Clock page.

Figure 2-54.Date & Time - Set Clock Page

3.Use the controls to complete the configuration, as described in the following table.

Control	Description
Set Time Using NTP Time	Specify this option to enable NTP time synchronization. NTP synchronization enables
Synchronization	the time stamps for logs to match those of other computers that use NTP time
	synchronization. This option is not required for proper system operation.
Set Time Manually	Date. Specify the current date. Use the following format: YYYY/MM/DD.
	Time. Specify the current time. Use the following format: HH:MM:SS.
Time Zone	Select your time zone from the drop-down list. The default is GMT (Greenwich Mean
	Time).

HP STORAGEWORKS EFS WAN ACCELERATOR MANAGEMENT CONSOLE USER GUIDE 125

2 CONFIGURING THE HP EFS WAN ACCELERATOR