HP Enterprise File Services WAN Accelerator Setting Snmp Parameters, To set Snmp parameters, 119

Control	Description
SMTP Server	SMTP Server. Specify a valid Simple Mail Transfer Protocol (SMTP) server. External
	DNS and external access for SMTP traffic is required for this feature to function.
	IMPORTANT: Make sure you provide a valid SMTP server to ensure that the users you
	specify receive email notifications for events and failures.
	SMTP Port. Specify a port number for the SMTP server.

2 CONFIGURING THE WAN ACCELERATOR

Setting SNMP Parameters

To set SNMP parameters

5.Click Apply to apply your settings to the running configuration. (Apply your settings to test a new configuration before saving them permanently.)

6.Click Save to save your settings permanently or click Reset to return the settings to their previous values.

You set SNMP parameters in the Reports - SNMP Settings page.

By default SNMP parameters are not configured.

1.Click the Setup tab to display the Setup menu.

2.Click Reports expand the Reports menu.

3.Click SNMP Settings to display the Reports - SNMP Settings page.

Figure 2-49.Reports - SNMP Settings Page

HP EFS

4.Use the controls to complete the configuration, as described in the following table.

ControlDescription

System Contact Specify the user name for the SNMP contact.

HP STORAGEWORKS EFS WAN ACCELERATOR MANAGEMENT CONSOLE USER GUIDE 119