HP Enterprise File Services WAN Accelerator manual Setting Auxiliary Interfaces

Setting

Auxiliary

Interfaces

5.Click Apply to apply your settings to the running configuration. (Apply your settings to test a new configuration before saving them permanently.)

6.Click Save to save your settings permanently or click Reset to return the settings to their previous values.

You set up an auxiliary interface, which provides support if your network has a dedicated management subnet, in the Host Settings - Interface: AUX page. For example, if your network has an auxiliary interface that connects and passes packets between the HP EFS WAN Accelerator and a different network, such as one purely for device management.

IMPORTANT: The primary and auxiliary interfaces cannot share the same network subnet. The auxiliary and in-path interfaces cannot share the same subnet.

Enabling this interface is optional.

To set an auxiliary1. Click the Setup tab to display the Setup menu. interface

2.Click Host Settings to expand the Host Settings menu.

3.Click Interface: AUX to display the Host Settings - Interface: AUX page.

Figure 2-17.Host Settings - Interface: AUX Page

58 CONFIGURING THE HP EFS WAN ACCELERATOR