HP Enterprise File Services WAN Accelerator manual Labels, 114

If you do not want to automatically forward traffic on these ports, you must delete the

Interactive and Secure in-path rules. For detailed information, see “Setting In-Path

Rules” on page 25.

For information on common port assignments, see Appendix A, “HP EFS WAN

Accelerator Ports.”

This feature is optional.

To create a port label 1. Click the Setup tab to display the Setup menu.

2.Click Port Labels to display the Port Labels page.

Figure 2-45.Port Labels Page

	3. Use the controls to complete the configuration, as described in the following table.
Control		Description
Add New Port Label		Label. Specify the label name. The following rules apply:
		• Port labels are not case sensitive and can be any string consisting of letters, the
		underscore ( _ ), or the hyphen ( - ). There cannot be spaces in port labels.
		• The fields in the various rule pages of the Management Console that take a physical
		port number also take a port label.
		• To avoid confusion, do not use a number for a port label.
		• Port labels that are used in in-path and other rules, such as QoS, and peering rules
		cannot be deleted.
		• Port label changes (that is, adding and removing ports inside a label) are applied
		immediately by the rules that use the port labels that you have modified.
		Ports. Specify a comma-separated list of port numbers.
		Add Label. Click Add Peer to add a neighbor to the peer list.
		Remove Selected Labels. To remove an entry, select it and click Remove Selected
		Labels.
114		CONFIGURING THE HP EFS WAN ACCELERATOR