HP Enterprise File Services WAN Accelerator manual To set the primary, Interface

To set the primary	1.	Click the Setup tab to display the Setup menu.
interface	2.	Click Host Settings to display the Host Settings - Interface: Primary page.

Figure 2-15.Host Settings - Interface Primary Page

	3. Use the controls to complete the configuration, as described in the following table.
Control		Description
IP Address		Obtain IP address automatically. Specify this option to automatically obtain the IP
		address from a Dynamic Host Configuration Protocol DHCP server. (A DHCP server
		must be available so that the HP EFS WAN Accelerator can request the IP address from
		it.)
		IMPORTANT: The primary and in-path interfaces can share the same subnet. The
		primary and auxiliary interfaces cannot share the same network subnet.
		Specify IP Address Manually. Specify this option if you do not use a DHCP server to
		set the IP address. Specify the following settings:
		• IP Address. Specify an IP address.
		• Subnet Mask. Specify a subnet mask.
		• Primary Gateway. Specify the primary gateway IP address. The primary gateway
		must be in the same network as the primary interface. You must set the primary
		gateway for in-path configurations.

2 CONFIGURING THE HP EFS WAN ACCELERATOR

HP STORAGEWORKS EFS WAN ACCELERATOR MANAGEMENT CONSOLE USER GUIDE 53