HP Enterprise File Services WAN Accelerator manual Setting the DNS, HP recommends you use DNS

To set a static, in-path1. Click the Setup tab to display the Setup menu. route

2.Click Host Settings to expand the Host Settings menu.

3.Click Routing: In-Path to display the Host Settings - In-Path Routing page.

Figure 2-19.Host Settings - In-Path Routing Page

	4. Use the controls to complete the configuration, as described in the following table.
Control		Description
Add New Route		Destination. Specify the IP address.
		Netmask. Specify the subnet mask.
		Gateway. Specify the IP address for the gateway. The gateway must be in the same
		network as the primary or auxiliary interface.
		Add Route. Specify this option to add the entry to the list.
		Remove Selected Routes. To remove an entry, click the check box next to the entry and
		click Remove Selected Routes.
	5. Click Save to save your settings permanently or click Reset to return the settings
		to their previous values.
Setting the DNS	You set the primary Domain Name Service (DNS) server and domain for the HP EFS
	WAN Accelerator in the Host Settings - DNS Settings page.
	HP recommends you use DNS.

HP STORAGEWORKS EFS WAN ACCELERATOR MANAGEMENT CONSOLE USER GUIDE 61

2 CONFIGURING THE HP EFS WAN ACCELERATOR