HP Enterprise File Services WAN Accelerator manual Setting Radius Servers, To set the monitor, 131

To set the monitor	1.	Click the Setup tab to display the Setup menu.
password	2.	Click Authentication to expand the Authentication menu.
	3.	Click Account: Monitor to display the Authentication - Account: Monitor page.

Figure 2-58.Authentication - Account: Monitor Page

	4. Use the controls to complete the configuration, as described in the following table.
Control		Description
Change Password		New Password. Specify the new administrator password. The password must have a
		minimum of 6 characters.
		Confirm New Password. Retype the new administrator password.
		Change Password. Click Change Password to apply your changes.

2 CONFIGURING THE HP EFS WAN ACCELERATOR

Setting RADIUS Servers

5.Click Save to save your settings permanently or click Reset to return the settings to their previous values.

You set up RADIUS server authentication in the Authentication - RADIUS Servers page.

RADIUS is an access control protocol that uses a challenge and response method for authenticating users. Setting up RADIUS server authentication is optional.

For detailed information about setting up RADIUS and TACACS+ servers, see the HP StorageWorks Enterprise File Services WAN Accelerator Deployment Guide.

HP STORAGEWORKS EFS WAN ACCELERATOR MANAGEMENT CONSOLE USER GUIDE 131