HP Enterprise File Services WAN Accelerator manual To set a service port

To set a service port 1. Click the Setup tab to display the Setup menu.

2.Click Advanced Networking to expand the Advanced Networking menu.

3.Click Service Ports to display the Advanced Networking - Service Ports page.

Figure 2-35.Advanced Networking - Service Ports Page

	4. Use the controls to complete the configuration, as described in the following table.
Control		Description
Add Service Port		Service Port. Specify a port number. The default service ports are 7800 and 7810.
		Add Port. Click Add Port to add the port to the service port list.
		Set As Default Port. To set a port as the default port, select it and click Set As Default
		Port.
		Remove Selected Port. To remove an entry, select it and click Remove Selected Port.
Add Service Port Mapping		Destination Port. Specify a destination port number.
		Service Port. Specify a port number.
		Add Mapping. Click Add Mapping to add a mapping to the mappings list.
		Remove Selected Mappings. To remove an entry, select it and click Remove Selected
		Mappings.
	5. Click Save to save your settings permanently or click Reset to return the settings
		to their previous values.

HP STORAGEWORKS EFS WAN ACCELERATOR MANAGEMENT CONSOLE USER GUIDE 91

2 CONFIGURING THE HP EFS WAN ACCELERATOR