HP Enterprise File Services WAN Accelerator manual Setting Monitor Password, To set, Administrator

To set the	1.	Click the Setup tab to display the Setup menu.
administrator	2.	Click Authentication to expand the Authentication menu.
password

3.Click Account: Admin to display the Authentication - Account: Admin page.

Figure 2-57.Authentication - Account: Admin Page

	4. Use the controls to complete the configuration, as described in the following table.
Control		Description
Change Password		New Password. Specify the new administrator password. The password must have a
		minimum of 6 characters.
		Confirm New Password. Retype the new administrator password.
		Change Password. Click Change Password to apply your changes.

Setting the

Monitor

Password

5.Click Save to save your settings permanently or click Reset to return the settings to their previous values.

You set the monitor user password in the Authentication - Account: Monitor page. A monitor user can view reports; a monitor user cannot make configuration changes.

130 CONFIGURING THE HP EFS WAN ACCELERATOR