HP Enterprise File Services WAN Accelerator manual Enabling Transparent Prepopulation

Enabling

Transparent

Prepopulation

To enable prepopulation settings

46

You can enable or disable transparent prepopulation in the Optimization Service - Prepopulation Settings and Shares page.

With transparent prepopulation the HP EFS WAN Accelerator warms the data store with data from the client. When a data store is warm, the HP EFS WAN Accelerator has already seen the data. When data is sent again over the WAN only new or modified data is sent, dramatically increasing the rate of data transfer over the WAN.

After you enable transparent prepopulation you create a share on a remote file server.

1.Click the Setup tab to expand the Optimization Service menu.

2.Click Prepopulation to display the Optimization Service - Prepopulation Settings and Shares page.

3.Click Enable to display the Prepopulation controls.

Figure 2-11.Optimization Service - Prepopulation Settings and Shares Page

CONFIGURING THE HP EFS WAN ACCELERATOR