HP Enterprise File Services WAN Accelerator manual Advanced Networking Connection Forwarding

To enable connection 1. Click the Setup tab to display the Setup menu. forwarding

2.Click Advanced Networking to expand the Advanced Networking menu and display the Advanced Networking -Connection Forwarding page.

Figure 2-26.Advanced Networking - Connection Forwarding Page

	3. Use the controls to complete the configuration, as described in the following table.
Control		Description
General		Enable Connection Forwarding. Specify this option to enable connection forwarding
		by default on all neighbors added to the peer list. The default port for connection
		forwarding is 7850.
		Port. Specify the port number to use as the default for neighbor appliance in-path port.
		The default is 7850.
		Keep-Alive Interval. Specify the number of seconds to use as the default interval for
		ping commands between neighbor appliances.
		Keep-Alive Count. Specify the number of tries to use as the default number of failed
		ping attempts before an appliance terminates a connection with a neighbor. The default
		value is 3.
		Apply. Click Apply to apply them to entries in the peer list.

2 CONFIGURING THE HP EFS WAN ACCELERATOR

HP STORAGEWORKS EFS WAN ACCELERATOR MANAGEMENT CONSOLE USER GUIDE 69