HP Enterprise File Services WAN Accelerator manual Viewing Current Connection Details Report

	NOTE: If the connection is in an unknown state, the line is greyed-out.
	3. Use the controls to customize the report, as described in the following table..
Control	Description
Filter	Specify an IP address or port number in the Filter text box to filter the report.
Type	All. Specifies all established active connections.
	• Established (Optimized) Only. Specifies the total established active connections.
	• Half-Opened (Optimized) Only. Specifies the total half-opened active connections. A
	half-opened connection is a TCP connection in which the connection has not been fully
	established. Half-opened connections count toward the connection count limit on the
	appliance because at any time they might become a fully opened connection. If you are
	experiencing a large number of half-opened connections, you might consider a more
	appropriately sized system.
	• Half-Closed (Optimized) Only. Specifies the total half-closed active connections.
	Half-closed connections are connections which the appliance has intercepted and
	optimized but are in the process of becoming inactive. These connections are counted
	toward the connection count limit on the appliance. (Half closed connections might
	remain if the client or server does not close their connections cleanly.) If you are
	experiencing a large number of half-closed connections, you might consider a more
	appropriately sized system.
	• Pass-Through Only. Specifies the total connections passed through, unoptimized
	when the connection limit has been reached.
	• Forwarded. Specifies the total number of connections that were forwarded when you
	have configured a connection forwarding neighbor to manage the connection.
Printer icon	To print your report, click the Printer icon in the upper right corner of the page.
	NOTE: If you have the Secure-CIFS feature enabled (which disables Server Message Block
	(SMB) signing), the Network - Current Connections report displays Protocol Error—this is an
	expected response. For detailed information about enabling Secure-CIFS, see “Configuring
	CIFS Protocol Support” on page 31.

Viewing the

Current

Connection

Details Report

The Network - Current Connections: Connection Details report displays details about the connected HP EFS WAN Accelerator such as the source and destination IP address, the peer HP EFS WAN Accelerator, the inner local port, and so forth.

172 CREATING HP EFS WAN ACCELERATOR REPORTS AND LOGS