HP Enterprise File Services WAN Accelerator manual Creating Memory Paging Reports, 190

	3. Use the controls to customize the report, as described in the following table..
Control	Description
Period	Select Last Hour, Last Day, Last Week, or Last Month from the drop-down list.
Refresh	Set a rate to refresh the report display:
	• To refresh your report every 15 seconds, click 15 Seconds.
	• To refresh your report every 30 seconds, click 30 Seconds.
	• To turn off refresh, click Off.
	NOTE: The refresh rate does not affect polling. Polling occurs every 5 minutes.
Printer icon	To print your report, click the Printer icon in the upper right corner of the page.

Creating

Memory Paging

Reports

The Health - Memory Paging report provides the total number of memory pages, per second, utilized in the time period specified.

The Health - Memory Paging report includes the following table of statistics that describe memory paging activity for the time period you specify.

Field	Description
Total Pages Swapped Out	Specifies the total number of pages swapped. If 100 pages
	are swapped approximately every two hours the HP EFS
	WAN Accelerator is functioning properly. If thousands of
	pages are swapped every few minutes, contact HP technical
	support.
Average Pages Swapped Out	Specifies the average number of pages swapped. If 100
	pages are swapped every couple of hours the HP EFS WAN
	Accelerator is functioning properly. If thousands of pages
	are swapped every few minutes, contact
	HP technical support.
Peak Pages Swapped Out	Specifies the peak number of pages swapped.
Peak Pages Swapped Out	Specifies the time and date that the peak number of pages
Occured At	were swapped.

What this Report Tells You

About Report Graphs

190

The Health - Memory Paging report answers the following questions:

‹How much memory is being used?

‹What is the average and peak amount of memory pages swapped?

In bar-graph and line-graph reports, the x-axis (or tick mark) plots time, according to the interval you select. The y-axis plots the metric of interest, such as gigabytes (GB) of bandwidth, percent (%) of data reduction, connection counts, and the like.

A diamond icon above the top margin of the graph points to the value on the x-axis (the time) at which the peak occurred.

A diamond icon outside the right margin of the graph points to the value on the y-axis (for example, the percent) that is the average value for the time period selected.

CREATING HP EFS WAN ACCELERATOR REPORTS AND LOGS