HP Enterprise File Services WAN Accelerator manual Setting Main Static Routes

	4. Use the controls to complete the configuration, as described in the following table.
Control		Description
AUX Interface Enabled		Select Enabled or Disabled from the drop-down list.
		IMPORTANT: The primary and auxiliary interfaces cannot share the same network
		subnet. The auxiliary and in-path interfaces cannot share the same subnet. You cannot use
		the auxiliary port for out-of-path HP EFS WAN Accelerators.
IP Address		Obtain IP address automatically. Specify this option to obtain the IP address from a
		dynamic host configuration protocol (DHCP) server.
		Specify IP Address Manually. Specify this option if you do not use a DHCP server to
		set the IP address. Specify the following settings:
		• IP Address. Specify an IP address.
		• Subnet Mask. Specify the subnet mask.
Additional Interface Settings		Speed. Select the speed from the drop-down list to set the speed for the auxiliary
		interface. The default value is Auto.
		If your network routers or switches do not automatically negotiate the speed and duplex,
		you must set the speed and duplex manually.
		Duplex. Select Auto, Full, or Half from the drop-down list to set the duplex speed for the
		auxiliary interface. The default value is Auto.
		If your network routers or switches do not automatically negotiate the speed and duplex,
		you must set the speed and duplex manually.
		MTU. Specify the Maximum Transmission Unit (MTU) value. The MTU is the largest
		physical packet size, measured in Bytes, that a network can transmit. The default is 1500.

2 CONFIGURING THE HP EFS WAN ACCELERATOR

Setting Main Static Routes

5.Click Apply to apply your settings to the running configuration. (Apply your settings to test a new configuration before saving them permanently.)

6.Click Save to save your settings permanently or click Reset to return the settings to their previous values.

You set static routes for device management or out-of-path network configurations in the Host Settings - Routing: Main page.

Main static network routes set routing rules in the main routing table for the primary interface.

HP STORAGEWORKS EFS WAN ACCELERATOR MANAGEMENT CONSOLE USER GUIDE 59