HP Enterprise File Services WAN Accelerator manual To set PFS share, Parameters, 103

To set PFS share	1.	Click the Setup tab to display the Setup menu.
parameters	2.	Click Proxy File Service to expand the PFS menu.
	3.	Click Shares to display the Proxy File Service - Shares page.
	4.	Click Add a new Proxy Share to display the Proxy File Service (PFS) - Shares
		page.

Figure 2-40.Proxy File Service - Shares Page

	5. Use the controls to complete the configuration, as described in the following table.
Control	Description
Local Name	Specify the name that you assign to a share on the HP EFS WAN Accelerator. The
	maximum length is 80 characters.
	IMPORTANT: The PFS share and the origin-server share name cannot contain
	Unicode characters. The Management Console does not support Unicode characters.
Remote Path	Specify the remote path of the origin file server where the share resides. You must use
	the Uniform Naming Convention (UNC) for the mapped drive for v3 shares. For
	example, \\<origin-file-server>\<local-name>
	IMPORTANT: The PFS share and the origin-server share name cannot contain
	Unicode characters. The Management Console does not support Unicode characters.
	NOTE: If you created your share with v2.x software, this value represents the name of
	the Windows server where the HP EFS Remote Copy Utility (RCU) is running. If the
	origin server is not the RCU server, you specify the remote path using the UNC format
	for the mapped drive. If the origin server is the same as the RCU server then you must
	type its full path including the drive letter, for example C:\data.
Comment	Optionally, specify a comment to help you identify the share.
HP STORAGEWORKS EFS WAN ACCELERATOR MANAGEMENT CONSOLE USER GUIDE		103

2 CONFIGURING THE HP EFS WAN ACCELERATOR