HP Enterprise File Services WAN Accelerator manual Upgrading Your Software, Configuration

Import Configuration From		IP/Host Name. Specify the IP address or host name of the HP EFS WAN Accelerator
		from which you want to import the configuration.
		Remote Admin Password. Specify the administrator password for the remote HP EFS
		WAN Accelerator.
		Remote Config Name. Specify the name of the configuration you want to import from
		the remote HP EFS WAN Accelerator.
		New Config Name. Specify a new, local, configuration name for this appliance.
		Import Shared Data Only. This is enabled by default. Keep this option checked to copy
		only the following common settings: in-path and out-of-path interface, protocols, CLI
		and Web, statistics, NTP, SNMP, and alarm settings. The following settings are not
		automatically copied: failover, SNMP (contact and location), log, and network settings.
		Import Configuration. To perform the import configuration operation, click Import
		Configuration.
		The imported configuration appears in the Configuration list but does not become the
		active configuration until you click Activate.
	TIP: Click the configuration name to display the configuration settings in a new browser
	window.
	IMPORTANT: You must restart the HP EFS WAN Accelerator service for a configuration to
	take effect. For detailed information, see “Starting and Stopping Services” on page 144.

Upgrading Your Software

You can upgrade or revert to a back-up version of the software in the Software Upgrade page.

142 CONFIGURING THE HP EFS WAN ACCELERATOR