HP Enterprise File Services WAN Accelerator Setting, Servers, Allowed to a given system, 133

Control		Description
Add New RADIUS Server		Server IP. Specify the server IP address.
		Authentication Port. Specify the port for the server.
		Server Key. Specify the server key.
		Timeout. Specify the time-out period.
		Retries. Specify the number of times you want to allow the user to retry authentication.
		Valid values are 0-5.
		Enabled. Select True to enable; select False to disable.
		Add Server. Click Add Server to add the RADIUS server to the list.
Enable/Disable		Enable or disable a RADIUS server.
Remove Selected Servers		Remove Selected Servers. To remove an entry, click the check box next to the entry
		and click Remove Selected Servers.
	NOTE: If you add a new server to your network and you do not specify these fields at that time,
	the global settings are applied automatically.
	5. Click Save to save your settings permanently or click Reset to return the settings
		to their previous values.
Setting	You set up TACACS+ server authentication in the Authentication - TACACS+ Servers
TACACS+	page.
Servers	Enabling this feature is optional.
	TACACS+ is an authentication protocol that allows a remote access server to forward
	a login password for a user to an authentication server to determine whether access is
	allowed to a given system.
	For detailed information about configuring RADIUS and TACACS+ servers to accept
	login requests from the HP EFS WAN Accelerator, see the HP StorageWorks
	Enterprise File Services WAN Accelerator Deployment Guide.

2 CONFIGURING THE HP EFS WAN ACCELERATOR

HP STORAGEWORKS EFS WAN ACCELERATOR MANAGEMENT CONSOLE USER GUIDE 133