HP Enterprise File Services WAN Accelerator Managing Configurations, To view scheduled jobs, 139

Viewing Scheduled Jobs

To view scheduled jobs

You can view completed, pending, inactive jobs, as well as jobs that were not completed because of an error in the Scheduled Jobs page.

Jobs are CLI commands that are scheduled to execute at a time you specify.

The only job you can schedule using the Management Console are software upgrades; for all other jobs, you must use the CLI.

For detailed information about scheduling jobs using the CLI, see the HP StorageWorks Enterprise File Services WAN Accelerator Command Line-Interface Reference Manual.

1.Click the Setup tab to display the Setup menu.

2.Click Scheduled Jobs to display the Scheduled Jobs page.

Figure 2-64.Scheduled Jobs Page

3.To remove an entry, click the check box next to the name and click Cancel/ Remove Selected Jobs.

4.Click Save to save your settings permanently or click Reset to return your settings to their previous values.

2 CONFIGURING THE HP EFS WAN ACCELERATOR

Managing Configurations

You can save, activate, and import configurations in the Configuration Manager Page.

Each HP EFS WAN Accelerator has an active, running configuration and written, saved configurations.

When you Apply your settings in the Management Console, the values are applied to the active running configuration. but the values are not written to disk and saved permanently.

HP STORAGEWORKS EFS WAN ACCELERATOR MANAGEMENT CONSOLE USER GUIDE 139