HP Enterprise File Services WAN Accelerator Setting Snmp Trap Receivers, To set an Snmp trap

Control	Description
System Location	Specify the physical location of the router.
Read Only Community Name	Specify a string to identify the read-only community. For example: public.

Setting SNMP Trap Receivers

To set an SNMP trap

5.Click Apply to apply your settings to the running configuration. (Apply your settings to test a new configuration before saving them permanently.)

6.Click Save to save your settings permanently or click Reset to return the settings to their previous values.

You set SNMP traps in the Reports - SNMP Trap Receivers page.

Traps are messages sent by an SNMP agent that indicate the occurrence of an event.

For detailed information about SNMP traps sent to configured servers, see“SNMP Traps” on page 210.

The default setup does not complete SNMP traps.

1.Click the Setup tab to display the Setup menu.

2.Click Reports expand the Reports menu.

3.Click SNMP Trap Receivers to display the Reports - SNMP Trap Receivers page.

Figure 2-50.Reports - SNMP Trap Receivers Page

120 CONFIGURING THE HP EFS WAN ACCELERATOR