HP Enterprise File Services WAN Accelerator manual Setting NTP Servers, To set an NTP server

Setting NTP Servers

To set an NTP server

NOTE: If you change the time zone, log messages retain the old time zone until you reboot the HP EFS WAN Accelerator.

4.Click Apply to apply your settings to the running configuration. (Apply your settings to test a new configuration before saving them permanently.)

5.Click Save to save your settings permanently or click Reset to return the settings to their previous values.

You set clock synchronization using NTP in the Date & Time - NTP Servers page.

Enabling NTP time synchronization enables the time stamps on the HP EFS WAN Accelerator logs to match those of other computers using NTP time synchronization. While this option is not generally required for proper appliance operation, NTP is required if you use PFS. For detailed information, see “Enabling Proxy File Service” on page 99.

1.Click the Setup tab to display the Setup menu.

2.Click Date & Time to expand Date & Time menu.

3.Click NTP Servers to display the Date & Time - NTP Servers page.

Figure 2-55.Date & Time - NTP Servers Page

126 CONFIGURING THE HP EFS WAN ACCELERATOR