HP Enterprise File Services WAN Accelerator Modifying the Host Name, To modify the host name

Modifying the Host Name

You can change the host name for the HP EFS WAN Accelerator in the Host Settings - Host Name page.

NOTE: You were prompted to specify a host name when you completed the installation wizard. This section describes how you can modify these settings.

2 CONFIGURING WAN A

To modify the host name

Mapping Hosts to IP Addresses

1.Click the Setup tab to display the Setup menu.

2.Click Host Settings to expand the Host Settings menu.

3.Click Host Name to display the Host Settings - Host Name page.

Figure 2-21.Host Settings - Host Name Page

4.Modify the text in the Host Name text box to change the host name.

5.Click Apply to apply your settings to the running configuration. (Apply your settings to test a new configuration before saving them permanently.)

6.Click Save to save your settings permanently or click Reset to return the settings to their previous values.

You can map a host name to IP addresses in the Host Settings - Hosts page.

Specify these values only if you are not using DNS to resolve host names and IP addresses in your system (or if the host does not have a DNS entry).

THE HP EFS CCELERATOR

HP STORAGEWORKS EFS WAN ACCELERATOR MANAGEMENT CONSOLE USER GUIDE 63