HP Enterprise File Services WAN Accelerator manual To set an, Authentication method

}

where you replace monitor with admin for write access.

For detailed information about setting up RADIUS and TACACS+ servers, see the HP

StorageWorks Enterprise File Services WAN Accelerator Deployment Guide.

To set an	1.	Click the Setup tab to display the Setup menu.
authentication method	2.	Click Authentication to display the Authentication - General Settings page.

Figure 2-56.Authentication - General Settings Page

	3. Use the controls to complete the configuration, as described in the following table.
Control		Description
Authentication Methods		Method 1. Select Local, RADIUS, or TACACS+ from the drop-down list.
		NOTE: Make sure you put the authentication methods in the order in which you want
		them to occur. If authorization fails on the first method, the next method is attempted, and
		so forth, until all the methods have been attempted.
		Method 2. Select None, Local, RADIUS, or TACACS+ from the drop-down list.
		Method 3. Select None, Local, RADIUS, or TACACS+ from the drop-down list.

128 CONFIGURING THE HP EFS WAN ACCELERATOR