HP Enterprise File Services WAN Accelerator Starting and Stopping Services, To start, stop, or

Starting and Stopping Services

You can start, stop, and restart the HP EFS WAN Accelerator service in the Start/Stop

Services page.

The HP EFS WAN Accelerator service is a daemon that execute in the background, performing operations when required.

Many of the HP EFS WAN Accelerator service commands are initiated at startup. It is important to restart the HP EFS WAN Accelerator service when you have made changes to your configuration.

WARNING: Restarting the HP EFS WAN Accelerator service disrupts existing network connections that are proxied through the HP EFS WAN Accelerator.

To start, stop, or	1.	Click the Setup tab to display the Setup menu.
restart services	2.	Click Start/Stop Services to display the Start/Stop Services page.

Figure 2-67.Start/Stop Services Page

3.Under Optimization, to start, stop, or restart the HP EFS WAN Accelerator service, click the appropriate button.

4.Click Save to save your settings permanently or click Reset to return your settings to their previous values.

TIP: To remove data from the data store, click Clean the Data Store. (You rarely need to clean the data store outside of a lab environment.)

144 CONFIGURING THE HP EFS WAN ACCELERATOR