HP Enterprise File Services WAN Accelerator manual Creating Throughput Reports, 157

	3. Use the controls to customize the report, as described in the following table..
Control	Description
Period	Select Last Hour, Last Day, Last Week, or Last Month from the drop-down list.
Response	Select All, Local, Remote, or Delayed from the drop-down list. The default value is All.
Server	Select the server for which you want to collect statistics from the drop-down list.
Resolution	Select High, Medium, or Low from the Resolution drop-down list. High (small bars)
	allows you to drill down to specific points in time, while Low (large bars) enables you to
	count or compare aggregate values in the time interval.
Refresh	Set a rate to refresh the report display:
	• To refresh your report every 15 seconds, click 15 Seconds.
	• To refresh your report every 30 seconds, click 30 Seconds.
	• To turn off refresh, click Off.
	NOTE: The refresh rate does not affect polling. Polling occurs every 5 minutes.
Printer icon	To print your report, click the Printer icon in the upper right corner of the page.

3 CREATING HP EFS WAN

ACCELERATOR REPORTS AND

Creating

Throughput

Reports

The Performance: Throughput report summarizes the throughput or total data transmitted for the application and time period specified.

The Performance - Throughput report includes the following table of statistics that describe data activity for the application and the time period you specify.

Field	Description
Average Throughput Over	Specifies the average amount of data transmitted.
Last Week
95th Percentile Throughput	Specifies the 95th percentile for data activity. The 95th
Over Last Week	percentile is calculated by taking the peak of the lower 95%
	of inbound and outbound throughput samples.
Peak Throughput Over Last	Specifies the peak data transmitted in the time period
Week	specified.
Peak Throughput Occured At	Specifies when the peak data activity occurred.

What This Report Tells You

About Report Graphs

The Performance - Throughput report answers the following questions:

‹What was the average throughput?

‹What was the peak throughput?

‹At what time did the peak throughput occur?

In bar-graph and line-graph reports, the x-axis (or tick mark) plots time, according to the interval you select. The y-axis plots the metric of interest, such as gigabytes (GB) of bandwidth, percent (%) of data reduction, connection counts, and the like.

A diamond icon above the top margin of the graph points to the value on the x-axis (the time) at which the peak occurred.

HP STORAGEWORKS EFS WAN ACCELERATOR MANAGEMENT CONSOLE USER GUIDE 157