Sanyo VA-SW80LITE Broadcast Transmission Settings Broadcast Window, User Level ID3/4, Record

BROADCAST TRANSMISSION SETTINGS

(BROADCAST WINDOW) (User Level: ID3/4)

Basic commands can be transmitted from a single user terminal to all connected DVRs in a single

operation. This is called “broadcasting”. Click on the toolbar to display the BROADCAST window.

The operation permissions for this window vary depending on the command being used.

1

2

3

4

5

1RECORD

(User Level: 3 or higher)

Click or to broadcast recording start and stop commands to the connected

DVRs.

2TIMER RECORD

(User Level: 3 or higher)

Click or to broadcast “ON/OFF” commands for setting timer recording.

3MENU UPLOAD (User Level: ID4)

This broadcasts menu setting data that is stored on the computer’s hard disk (data that has been saved using the “SAVE” command) to all connected DVRs.

1Click .

A dialog box will be displayed.

2Select the required menu file that has been saved, and then click [Open]. The selected filename will be displayed in the “FILENAME” box of the “MENU UPLOAD” window.

You should first save the menu setting details into a file before using this function.

3 Click .

The menu setting details will then be transmitted.

You can select whether to transmit the “Camera Title” and “Motion Sensor” settings or not. To transmit the setting, select the check box.

English 41