Alarm Recording User Level ID4 | Sanyo VA-SW80LITE specs

RECORDING IMAGES

■Alarm Recording (User Level: ID4)

If an external alarm (sensor switch that is installed to the alarm input terminal of the DVR) or a motion sensor detects a problem, recording of alarm images starts automatically.

1 Use the “REC MODE SET” tab window in the “MENU” window to set the alarm recording conditions. (P.30)

2 When an alarm such as from an intruder is detected, the ALARM indicator on the DVR will illuminate and alarm recording will start automatically.

3 Once the specified alarm recording duration has elapsed, the ALARM indicator will switch off and alarm recording will stop automatically.

Alarm recording images can be searched for using the search function. (P.55)

The following limitations apply to alarm recording operation.

(1)Immediately after the recording operation starts

(2)Immediately after the [PICTURE QUALITY] or [AUDIO RECORDING] menu setting has been changed and the display has returned to the camera window.

For (1) and (2):

•Alarm input will not be received for a maximum period of 4 seconds, but alarm input can be received after that.

•Recording of images as a result of alarm input will not be carried out for a maximum period of 6 seconds.

(3)Immediately after recording ends

•Alarm input will not be received for a maximum period of 5 seconds, but alarm input can be received after that.

•Recording of images as a result of alarm input will not be carried out for a maximum period of 10 seconds.

The following limitations apply to normal recording and timer recording operation.

•Normal recording and timer recording operations can be received immediately after the “PICTURE QUALITY” or “AUDIO RECORDING” menu settings are changed and the display has returned to the camera window, but recording operation is not possible for a maximum period of 6 seconds.

•Normal recording and timer recording operations can be received immediately after a recording operation ends, but recording will not be carried out for a maximum period of 10 seconds.

52

English

Image 53

Sanyo VA-SW80LITE instruction manual Alarm Recording User Level ID4

Contents

VA-SW804 VA-SW80LITE Contents Software Version DVR Utility Software Features DVR1 DVR2 DVR3DVR4 Network ConfigurationIP address setting range Recommended graphics chip Network ConfigurationSystem Requirements For Windows XP TCP/IP Settings Welcome window appears Installing the SoftwareClick Next in the Choose Destination Location window Click Next in the Select Program Folder window Installing the Software User Level Logging IN/LOGGING OFF/DISPLAY Language Setting Hardware key installation Logging IN/LOGGING OFF/DISPLAY Language SettingAuthentication check Logging Logging Off Display Language SettingDisplay While Communication is in Progress Click Basic Window Flowchart Sequence P.44 Clock & System P.23 Broadcast P.41 Timer Download P.66Tamper Detect P.74 Exit Initial Setup Setup Window P.18 Basic Network SettingsSystem Setup tab User Level ID4 System Update tab Basic Network SettingsClock SET tab INFORMATION1 tab Menu Settings Menu Window P.28 Operation of Setting Buttons English, French, Spanish, German System Setup tab LOG-IN Password Initial Setup Setup Window Create List Register DVR tab Operation only possible at master computer Boxes respectively, and then click Select Auto in the TCP/IP ADDR. boxClick Specify the address of the registration to be deleted Select Manual in the TCP/IP ADDR. boxRegistration list display Default setting according to the computer’s internal clock Clock and System Update SettingsClock SET tab Click the Clock SET tab index System Update tab Clock and System Update Settings INFORMATION1 tab Initialize HDD INFORMATION2 tab Power FailureUsed Time Firmware Version Current setting data is loaded and displayed Basic flow of menu settings Select a setting tabLANGUAGE/LANGUE/IDIOMA/SPRACHE Default setting English LANGUAGE/D.S.TIME SET tab Daylight Saving Default setting no USE Menu Settings Menu WindowFollowing example shows the default settings EXT. Clock Adjust Time REC Mode SET tab Disk Full Reset button is forcibly locked Overwrite Default setting onSeries REC Default setting OFF Resuming recording that has been halted 5S, 10S, 20S, 40S, 1M, 2M, 3M, 4M, 5M, 10M, 15M, CC SET Default setting OFF Timer REC SET tabWeek START/STOP Select WED from the Week drop-down list box in row Click Over 24HSelect MON from the Week drop-down list box in row Holiday SET tab This completes the holiday settingUse the Month and DAY spin buttons to set the month and day Up to 20 days can be specified as holidays Alarm Count Default setting on Cumulative number of alarms DATE/TIME Default setting onCamera Title Default setting on Title for connected camera DISPLAY/BUZZER SET tab KEY in Default setting OFF Only enabled when Overwrite is set to OFFNON REC Default setting OFF Buzzer Alarm Monitor SET Available settings 1-30 secondsMonitor SET tab Monitor SET Mask SET Camera Title TITLE/MOTION SET tab Timer Record Broadcast Transmission Settings Broadcast WindowUser Level ID3/4 Record System Update Broadcast Transmission Settings Broadcast WindowClock SET User Level ID4 Select the required menu and then click Open Display Screen Type Image Display WindowsQuad screen Multi screen Sequence Display Function Switching Display WindowsImage Display Windows Quad screen Multi screen Full screen Title Bar Monitoring with Quad Screens Monitoring Live Images User Level ID1 or higherClick 1 on the toolbar Double-click a DVR in the Target window User Level ID1 or higher Monitoring Live ImagesMonitoring with Multi Screens Display example DVR-1 Live 01-20 Volume adjustment Disconnecting DVRsImage Audio Output Output channel selection Normal Recording User Level ID3 or higher Recording Images Normal recording from the multi screen Recording ImagesClick the title bar 2 of the recording window Click 4 on the recording control panel Timer Recording Alarm Recording User Level ID4 Playing Back Recorded Images Switches to live image modePlaying Back Recorded Images Click in the playback control panel Functions of Each Playback Control Panel Component Playing Back Recorded Images User Level ID2 or higher SearchingTime/Date Search Display the playback window for the DVR to be searched Searching Alarm Search Selected alarm will change to blue Select the alarm to be played back from the alarm listClick5 After checking the images in the preview Window, click Alarm Search window will be displayed Alarm Thumbnail SearchDisplay the thumbnail images Click the title bar for the thumbnail to be played back Playing back images in the main window Saving Still ImagesStill playback at the image to be saved Click the still button in the playback control panel User Level ID2/3 or higher DownloadSpecifying the Image Range Click Download Start Point in the saving control panel Functions of Each Download Window Element DownloadLog window Download Start POINT/DOWNLOAD END Point Download FilenameADD Preview Basic Downloading Operations Individual Download Completion of download Deleting a preset file Preset List Operations Batch DownloadsDownloading all preset files Checking images Timer Download Status Timer DownloadFolder Path Disk Space Set the timer download settings as follows Timer download procedureIf the Week setting for Schedule is set to DLY Set the download starting time Program orange display Download timer reservation set Timer download standbySpecify the download destination folder Select the SET check box Example of incorrect setting Image range setting for downloadingDownload range 600 Download start time Download range 600 English Timer Download Example DVR-1200306231500.mp2 Basic timer download operation and specifications User Canceled Communication ErrorDownload Timeout Start Time If tampering was detected Tamper DETECTIONUser Level ID2 higherDisplaying detection results Main Functions Installation/Saving LocationOperating Environment Starting File menu MP2 Viewer Window Structure and Functions of Each PartOption menu Zoom in Increases the image display size MP2 Viewer Filename Playback modeSlide bar Title bar Select and open the image file MP2 Viewer Opening Files Playback ControlReview button Cue button MM-DD-YY Hhmmss MP2 Viewer Saves a Still ImagePrints Still Images Detecting Tampering of Images MP2 Viewer Searches for Images