MONITORING LIVE IMAGES

(User Level: ID1 or higher)

 

 

Disconnecting DVRs

To disconnect a DVR, click

in the main

window.

 

When you do this, communication with the DVR that is being monitored (or the DVR that has been specified by clicking a title bar when monitoring in a multi screen) will stop and the screen will return to the status it was at before the connection.

To reconnect the DVR, follow the normal procedure and double-click the DVR in the “TARGET” window.

Image Audio Output

If “AUDIO RECORDING” has been set to “ON” in the menu settings, the sound for the images being monitored can also be output. The sound that is output will come from the DVR that has been specified by clicking a title bar.

The audio output can be set and adjusted using the audio adjustment panel.

1Volume adjustment

Drag the control to the left or right to adjust the volume.

2Output channel selection

Use the check boxes to select the channel. Multiple channels can be selected.

CH1+CH2: Sound from channels 1 and 2

(L)is output

CH3+CH4: Sound from channels 3 and 4

(R)is output

3Sound muting

If you select the MUTE button, the sound will be muted. The MUTE button takes priority over the channel select buttons.

Sound will not be output for channels which have the MASK setting activated, regardless of the output audio settings.

1

2

3

48

English

Page 49
Image 49
Sanyo VA-SW80LITE Disconnecting DVRs, Image Audio Output, Volume adjustment, Output channel selection, Sound muting